Series 3100 “The Viper” Two Flute Compression Spiral
Series 3100 “The Viper” Two Flute Compression Spiral
Compression means the upcut and downcut spiral flutes compress the material being cut preventing chipping or fuzzing on the top and bottom of the cut. Our unique flute geometry allows the “Viper” to cut faster and longer than other compression spirals on the market today. It also allows for extended sharpening life with excellent performance throughout the tool’s useful life. Compression spirals are used extensively for cutting double-sided laminates (melamine, vinyl, high pressure laminates, painted board, etc.). This series of compression spirals is not recommended for cutting materials thinner than 5/8”.
|
PART # |
CED |
CEL |
SHK DIA |
OAL |
UPCUT LENGTH |
|
6mm |
25mm |
6mm |
64mm |
0.354 |
|
|
8mm |
28mm |
8mm |
76mm |
0.433 |
|
|
10mm |
35mm |
10mm |
76mm |
0.500 |
|
|
12mm |
35mm |
12mm |
88mm |
0.650 |
|
|
1/4 |
7/8 |
1/4 |
3 |
0.250 |
|
|
3/8 |
1 1/8 |
3/8 |
3 |
0.500 |
|
|
1/2 |
1 |
1/2 |
3 |
0.550 |
|
|
1/2 |
1 3/8 |
1/2 |
3 1/2 |
0.650 |
|
|
1/2 |
1 3/4 |
1/2 |
3 1/2 |
0.800 |
|
|
1/2 |
2 |
1/2 |
4 |
0.800 |
|
|
5/8 |
2 |
5/8 |
4 |
0.900 |
|
|
3/4 |
1 5/8 |
3/4 |
4 |
0.750 |
|
|
3/4 |
2 |
3/4 |
5 |
1.000 |
|
|
3/4 |
2 1/2 |
3/4 |
5 |
1.250 |
(m) = 1/4” upcut for mortise cuts or thin materials
L= Left Hand Rotation CED = Cutting Edge Diameter
CEL = Cutting Edge Length SHK DIA = Shank Diameter
OAL = Overall Length
Featured
Order With Confidence
This site is secure.
Our site is secure, and we will not use your information without your consent.