Series 3100XP - Two Flute “Xtreme Performance” Compression Spirals
Series 3100XP - Two Flute “Xtreme Performance” Compression Spirals
“XP” — which stands for "Xtreme Performance" — are specifically manufactured to provide maximum tool life in melamine, high pressure laminated particle board and MDF materials. Users can expect 3-5 times more tool life as compared to standard compression spiral geometry. The compression geometry will provide a chip free edge on both sides of the material being cut.
|
PART # |
CED |
CEL |
SHK DIA |
OAL |
UPCUT LENGTH |
|
3/8 |
1 1/8 |
3/8 |
3 |
0.500 |
|
|
3184XP (m*) |
3/8 |
7/8 |
3/8 |
3 |
0.1875 |
|
3185XP (m) |
3/8 |
7/8 |
3/8 |
3 |
0.250 |
|
1/2 |
1 |
1/2 |
3 |
0.550 |
|
|
3187XP (m*) |
1/2 |
1 |
1/2 |
3 |
0.1875 |
|
3189XP (m) |
1/2 |
1 |
1/2 |
3 |
0.250 |
|
3150XP (m) |
1/2 |
1 3/8 |
1/2 |
3 1/2 |
0.250 |
|
1/2 |
1 3/8 |
1/2 |
3 1/2 |
0.650 |
|
|
1/2 |
1 5/8 |
1/2 |
3 1/2 |
0.650 |
|
|
3/4 |
1 5/8 |
3/4 |
4 |
0.750 |
|
|
3/4 |
2 |
3/4 |
5 |
1.000 |
(m*) = 3/16” upcut length for 1/4” material or dado cuts
(m) = 1/4” upcut for mortise cuts or thin materials
L= Left Hand Rotation CED = Cutting Edge Diameter
CEL = Cutting Edge Length SHK DIA = Shank Diameter
OAL = Overall Length
-
NEW -
NEW
Featured
Order With Confidence
This site is secure.
Our site is secure, and we will not use your information without your consent.